Introduction

The MCP35X� pump is a substantial evolution from the long established MCP355 series. It differentiates itself from its sibling by two primary features:

• The pump housing:
  • has been redesigned to provide considerably enhanced hydraulic performance;
  • is compatible with multiple tubing options thanks to the adoption of the G1/4 port standard;
  • can host an optional "built-in" reservoir;
  • is also sold separately, and remains compatible with all MCP3XX series pumps
• The motor:
  • is now PWM compatible, allowing variable speed control thru the motherboard from 1300 to 4500 rpm.

Summary of features and benefits

• Small Footprint: 2.4" x 2.4" x 1.36";
• 50,000 hours MTBF (Mean Time Between Failure) ;
• 12 Volts DC convenience: plugs into the computer power supply
• Variable speed control via PWM thru the motherboard, from 1300 rpm for completely silent operation, to 4500 rpm for ultra high flow performance;
• Superior head pressure and flow rate(in the useable range) to any pump in its footprint: the MCP35X� is particularly well adapted to support multiple devices in the same loop, such as multiple radiators, and/or waterblocks;
• G1/4" ports standard for compatibility with a large assorment of fittings;
• No maintenance when used with distilled water, and anti-fungal additives (our HydrX� additive is recommended);
• Quick installation with adhesive neoprene pad, or permanent installation with supplied hardware;
• Optional "built-in" reservoir;
• 2 year warranty

Technical specifications