Sorry but this item is currently unavailable.
Please check back at a later stage.
AC Input: | 115V - 230V |
---|
Dimensions WxDxH: | 5.9" x 5.5" x 3.4" |
---|
Form Factor: | ATX |
---|
MTBF: | 100,000 hours on maximum load at +25° C degree |
---|
Output Power: | 300 W |
---|
Warranty: | 1 Year |
---|
- Complied with ATX and ATX12V standard |
- High efficiency and reliability |
- Remote On/Off function |
- Internal 12V DC fan included |
- Noise Killer (Thermal fan speed control function) |
- Low noise and ripple |
- Complies with FCC part 15 subpart J class B and CISPR 22 Class B |
- Output over voltage, short circuit, and over current protection |
- 100% Hi-pot, ATE, and burn-in tested |
- Re-settable power shut down |
- Approved by UL 1950, CSA C22.2 Level 3, TUV EN60950, Nemko (CB Report) |
Input Range - 95~132/190~264V AC, Manual-select |
Frequency - 47~63Hz |
Input Current - 10A (RMS) @115V AC, 5A (RMS) @230VAC |
Inrush Current - 60A Max for 132V AC Cold Start |
Temperature Range - Operating 0° C ~ +25° C on full load; storage & shipping -20° C ~ +65° C |
Humidity - 90% on operating and 95% on storage |
Dielectric Withstand - Primary to frame ground 1800V AC for 1 second |
Efficiency - 65% at minimum measured at nominal AC main voltage and frequency with maximum load on all output |
Rise Time - Less than 20ms on all outputs |
Hold-up Time - 16.6ms minimum at 115V/60Hz; 20ms minimum at 230V/50Hz input voltage |
Power Good Signal - Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible) |
Leakage Current - Less than 3.5mA |
MTBF - 100,000 hours on maximum load at +25° C degree |
Dimension (WxHxL) - 150x86x140mm/5.9x3.4x5.5 inches |
Weight - 4.20lbs |