Loading... Please wait...Sorry but this item is currently unavailable.
Please check back at a later stage.
| Output Power: | 300 W |
|---|
| Warranty: | 1 Year |
|---|
| MTBF: | 100,000 Hours |
|---|
| Form Factor: | SFX |
|---|
| Dimensions WxDxH: | 5" x 5.1" x 2.5" |
|---|
| AC Input: | 115V/230V |
|---|
| Fan Features: | 6cm Ball Bearning Fan |
|---|
| Weight: | 1.8 lbs |
|---|
| Features |
| Complied with SFX and SFX12V standard |
| Active Power Factor Correction (PFC) meet EN61000-3-2 |
| High efficiency and reliability |
| Remote ON/OFF function |
| Internal 12V DC fan included |
| Noise Killer (thermal fan speed control function) |
| Low noise and ripple |
| Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation |
| Output over voltage, short circuit, and over current protection |
| 100% Hi-pot, ATE, and burn-in tested |
| Re-settable power shut down |
| Approved by UL60950, CSA C22.2 NO. 60950, TUV EN60950 or VDE EN60950, NEMKO EN60950 (CB Report), CE |
| Input Characteristics |
| Input Range: 90 - 265Vac (RMS), Full Range Input |
| Frequency: 47 - 63Hz |
| Input Current: 4A (RMS) at115Vac, 2A (RMS) at 230Vac |
| Inrush Current: No damage, typical 80A Max at cold start |
| Specification |
| Temperature Range:Operating: 0C - +50C on full load storage shipping: -20C - +80C |
| Humidity: 5 - 95% on operating and storage |
| Dielectric Withstand: Input to frame ground 1800 VAC for 1 second |
| Efficiency: 75%at minimum measured at nominal AC main voltage and frequency with full load on all outputs |
| Rise time: Less than 20ms |
| Hold-up Time: 17ms minimum at nominal input voltage |
| Power Good Signal:Power on delay time 100 - 500ms, off delay 1ms minimum (TTL and CMOS compatible) |
| Leakage Current: Not exceed 3.5mA |
| MTBF: 100,000 hours on maximum load at +25C |
| Dimensions (LxWxH): 130x125x63.5mm/5.1x5x2.5inch |