Loading... Please wait...

Sparkle FSP200-50PL 200W Flex ATX12V Power Supply w/ UL/CSA approved

Price:

$47.99

MPN:

FSP200-50PL

Brand:

SPARKLE

UPC:

6.78E+11

Condition:

NEW

Availability: Ships in 2 business days

Ships in 2 business days

Shipping:

Calculated at checkout

Sorry but this item is currently unavailable.

Please check back at a later stage.

Add to Wishlist

Product Description

Connectors:
> 1x 20-pin Main Connector
> 1x   4-pin P4 (2x2)
> 3x   4-pin Peripheral / IDE Power
> 1x   4-pin Floppy Power

Features:
> Complied with Flex ATX and ATX12V standard
> High efficiency and reliability
> Remote On/Off function
> Internal 12V DC fan included
> Noise Killer (Thermal fan speed control function)
> Low noise and ripple
> Complies with FCC part 15 subpart J Class B and CISPR 22 Class B
> Output over voltage, short circuit, and over current protection
> 100% Hi-pot, ATE, and burn-in tested
> Re-settable power shut down
> Approved by UL 1950, CSA C22.2 Level 3

Specification:
> Temperature Range: Operating 0° C ~ +25° C on full load; storage & shipping -20° C ~ +80° C
> Humidity: 95% on operating and 95% on storage
> Dielectric Withstand: Input to frame ground 1800V AC for 1 second
> Efficiency: 72% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
> Rise Time: Less than 20ms
> Hold-up Time: 17ms minimum at nominal input voltage
> Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
> Leakage Current: Not exceed 0.75mA at 115V AC, 60Hz
> MTBF: 100,000 hours on maximum load at +25° C degree
> Dimension (WxHxL): 81.5x40.5x150mm/3.2”x1.6”x6” inches

Input Characteristics:
> Input Range: 90~132/180~264V AC, Manual Selection
> Frequency: 47~63Hz
> Input Current: 5A (RMS) @115V AC, 3A (RMS) @230V AC
> Inrush Current: 50A Max for 115V AC, 80A Max for 230V AC Cold start

Output Characteristics:

Output Voltage	Minimum Load	Maximum Load	Peak	Load Reg.	Line Reg.	Ripple Noise
+3.3V	0.2A	16.0A	xxx	± 5%	± 1%	50mV P-P
+5V	1.0A	15.0A	xxx	± 5%	± 1%	50mV P-P
+12V	0.2A	12.0A	13A	± 5%	± 1%	120mV P-P
-12V	0.0A	0.3A	xxx	± 10%	± 2%	120mV P-P
+5Vsb	0.0A	2.0A	xxx	± 5%	± 1%	100mV P-P
> +5V and +3.3V total output not exceed 80W > +3.3V, +5V, and +12V total output cannot exceed 186.5W