■ Support up to 12 drives in unprecedented 30 liter Micro-ATX chassis size
■ Designed for vertical or horizontal position, allow users to freely place CS381 anywhere
■ Includes two long-life (L10, 70,000 hours) dual ball bearing 120mm fans
■ Hot-swap drive trays support up to eight 3.5” or 2.5” SAS-12G / SATA-6G drives with two LED indicators for displaying drive status
■ Accommodates SFX or SFX-L power supply
■ Support normal height expansion slots for installation of cards up to 267mm long
■ Kensington lock on front panel for additional security
Model No. | SST-CS381B | |
Material | Plastic and metal mesh front panel, galvanized steel body | |
Motherboard | Micro-ATX, Mini-DTX, Mini-ITX | |
Drive bay | External | 3.5” / 2.5” SAS / SATA external hot-swapping x 8 |
-- | ||
Internal | 2.5” (5mm ~ 15mm) x 4 (2 on left racks) | |
HDD backplane | Mini-SAS HD SFF-8643 36 pin connector x 2*/** | |
HDD Interface | SATA drive up to 6 Gbit/s (depends on drive speed) SAS drive up to 12 Gbit/s (depends on drive speed) |
|
Cooling system | Front | -- |
Rear | 2 x 120mm 1300rpm 28dBA dual ball bearing fan Life time 70000hr (L10) | |
Side | 2 x 120mm or 3 x 80mm fan slot (optional) | |
Top | -- | |
Bottom | -- | |
Internal | -- | |
Radiator support | Rear | 1 x 120mm or 1 x 240mm |
Expansion slot | 4 | |
Front I/O port | USB 3.1 Gen 1 x 2 audio x 1 MIC x 1 |
|
LED Indicator | Chassis | Power ON: Blue Accessing: Red blinking |
HDD Tray | HDD Power LED : Red HDD Access : Blue blinking |
|
Power supply | SFX / SFX-L PSU (sold separately) | |
Expansion Card limitation | Up to 10.5” (266.7mm), please refer to manual for more details | |
Limitation of CPU cooler | 59mm*** | |
Limitation of PSU | 200mm | |
Net weight | 7 KG | |
Dimension | 400mm (W) x 225mm (H) x 316mm (D) , 28 Liters 15.75" (W) x 8.86" (H) x 12.44" (D) , 28 Liters |
|
Extra | Kensington lock |
Remark |
* Please note the directionality of MINI SAS cables used, cables such as CPS05-RE is recommended for use with SATA ports on motherboard. ** MINI-SAS HD ports on backplane are not compatible with U.2 ports on motherboards. *** If CPU cooler used has top-down airflow direction, please make sure there is at least 10mm of clearance above the fan for sufficient air intake. |