SCYTHE SCMG-5000 (MUGEN 5) Dual Fan H.P.M.S. II Heat Pipe CPU Cooler

Asymmetric design for maximum memory compatibility 
RAM modules with large passive heatsinks are no problem for the Mugen 5. Its heatpipes are slightly sloped backwards so that the radiator is not centered above the baseplate, but slightly offset. This asymmetrical design allows unrestricted access to the memory slots.

Kaze Flex 120 PWM Fan
e Mugen 5 is equipped with a PWM fan from the newly developed Kaze Flex series. It operates in a range from 300 to 1.200 RPM. The self-contained liquid bearing (Sealed Precision FDB) reduces friction and wear to a minimum, which results in an average lifespan of 120.000 hours. Rubberized pads have a decoupling effect and prevent the transfer of vibrations.

H.P.M.S. II (Hyper Precision Mounting System II)
The second generation of the Hyper Precision Mounting System was designed with several small improvements benefiting the user friendliness. The already pre-assembled mounting bar makes installation much simpler, while spring-loaded screws prevent uneven pressure distribution. The Mugen 5 package also includes an extra-long screwdriver for easy mounting.

Dual Fan Mount Structure
Like its predecessors, the Mugen 5 was designed to mount a second fan (not included). This leads to an increased cooling performance by making use of the push / pull principle. A second set of fan-clips is included

Compatibility:
Intel®:
Socket LGA775
Socket LGA1150
Socket LGA1151
Socket LGA1155
Socket LGA1156
Socket LGA1366 
Socket LGA2011 / 2011-v3 (Square ILM)

AMD®:
Socket AM2
Socket AM2+
Socket AM3
Socket AM3+
Socket FM1
Socket FM2
Socket FM2+

Please note that an original backplate with screw mounting is needed for installation on mainboards with AMD sockets. Please check before buying if the backplate is fixed by screws! If the backplate uses plastic-pins, mounting of this cooler is not possible.

Overall Dimensions WxHxD:
130 x 154,5 x 110 mm / 5.12 x 6.08 x 4.33 inch

Weight: 
890 g / 31.4 oz

Accessory:
Mounting parts for Intel and AMD sockets, fan, fan clips, thermal grease, installation manual.

Baseplate Material / Heatpipes:
Nickel-plated copper

Fan Specifications

Model Name:
Kaze Flex 120 PWM

Dimensions:
120 x 120 x 27 mm / 4.72 x 4.72 x 1.06 inch

Noise Level: 
4 ~ 24,9 dBA

Air Flow: 
16,6 ~ 51.17 CFM / 28,2 ~ 86,93 m³/h

Fan Speed: 
300 (±200 rpm) ~ 1.200 rpm (±10%) (PWM-controlled)

Static Pressure:
0,75 ~ 10,3 Pa / 0,076 ~ 1,05 mmH²O

Bearing Type:
Sealed Precision FDB

Voltage:
12V

MTTF:
120.000 Hours (25°C)