RC27332X16C7 2U 2-slot PCIE X16 Flexible Riser Card w/ 7cm ribbon

This riser is good for motherboard with multiple x16 PCIe slot, not for one single x16 slot.

2U up to 3-slots PCIe/PCI/PCI-X independent connection w/custom lengths of EMI shielded ribbon cable.

PCIe slots and goldfingers can be configured to PCIe x1, x4, x8 or x16.
Picture shown is riser with 2-slots PCIe X8 which can be configured up to 3-slots independent expansions( 3-slots PCIe, 2-slots PCIe + 1-slot PCI/PCIX or 1-slot PCIe + 2-slots PCI-X independent). The top riser slot sit to the board slot6 which is aligned to the horizontal three-slots cutout of the chassis, the middle and bottom slots are connected with various lengths of ribbon cable to reach different position of board slots.

(2-slots PCIe x16 on top and middle riser slots)

180mm x 72mm

20mm (0.8”) spacing between two slots.

Good for a standard 2U rackmount chassis.