Loading... Please wait...Sorry but this item is currently unavailable.
Please check back at a later stage.
iR2620-2S-S2 is an internal RAID module designed in 2 of 5.25” CD-Rom bay to satisfy the demands of SMB and industrial computing environment. With LCD tents leaving you to easily grasp HDD status.
iR 2620 accommodates 2 of 3.5 ” SATA II hard drive and offering both RAID 0 and RAID 1 functions . Uses the RAID 0 function to integrate the capacity of two hard drives and to enhance both read & write performance. On the other hand, uses RAID 1 function for data redundancy by mirroring data among both hard drives to prevent the event of a hard drive failure causes system shutdown.
| RAID Chipset | RAIDON SR2045 |
| Host Interface | SATA II |
| RAID Level | RAID 0/1 |
| Supported Hard Drives | 2 x 3.5" SATA II HDD Single HDD Capacity: Tested up to 8TB |
| Drive Bay | Two |
| Hot Swap Support | Yes, RAID 1 |
| Auto Rebuilding | Yes, RAID 1 |
| LED Indicator | Yes |
| Buzzer | Yes |
| Control Interface | GUI (Windows Only) |
| Environmental Protection | Fan Failure & Overheat Detection |
| Fan | 1 x 6 cm Fan |
| Power Supply | 2 x 4-pin molex connector |
| Operating System Support | Windows / Mac / Linux |
| Certification | CE / FCC |
| Operating Temperature | 50 to 95° F / 10 to 35° C |
| Storage Temperature | -4 to 116° F / -20 to 47° C |
| Relative Humidity | 5 to 95% noncondensing |
| Dimensions (W x L x H) | 5.7 x 8.0 x 3.3" / 146 x 202 x 85 mm |