Sorry but this item is currently unavailable.
Please check back at a later stage.
important technical information:
Some 2.5" SATA hard drives require the current up to 1Amp and the external AC adapter (optional) may be needed. Due to some notebook of power saving feature, not all of the USB port can drive 500mA current. All hard drive has a power rating printed. If you see a power rating greater than 500mA or 0.5A then most likely you will need an external AC power adapter ( DC 5V/2A,3mm DC plug)
Card Bus Specification:
Data rates | up to 1.5 Gbs |
Fully compliant with | serial ATA 1.0a,serialATA 1.0 and cardbus |
support | SATA TCQ commands |
256 byte data FIFO for each channel | |
Queued/overlapping ATA command
on board bus master engine relieve the system processor from book keeping and enhance performace | |
port type | two external serial SATA ( eSATA )ports |
slot type | 32 bit PCMCIA cardbus slot |
Dimension | 54x106x5mm |
EMI/safety |
FCC,CE
|
Package content:
2.5" SATA HDD Enclosure
Dual eSATA port PCMCIA card
eSATA cable
Mounting Screws
User Manual