The Enzotech Stealth Full Copper CPU Liquid Cooling Block is stylish new CPU cooler with an all black appearance. The block is manufactured to the highest accuracy. The pure copper base features a radial patterned, dense micro-pin design with only 0.3 mm between each pin. The micro-pin pattern is designed to maximize the surface area the liquid coolant is exposed to for increased thermal transfer rates. The base of the waterblock is machined flat to 0.0003 inch accuracy and everything on the block is polished to a mirror finish. For extra protection, the block is leak tested before leaving the factory. The Enzotech Stealth ships with retention modules & backplates for 775 and 1366. Warning! - Block NOT compatible with 1/2" x 3/4" compression fittings!
** Note Socket LGA 2011 requires the optional mounting kit
- Super high density, radial pattern, micro-pin design (0.3mm from pin to pin), provides maximum surface exposure area for superior cooling performance.
- Direct injection water flow design, delivers coolant straight to CPU core. *Eight return holes pulls heated water away for extremely fast heat dissipation.
- Metallic Mirror coating gives elegant style and superb finish.
- Water block's base is machined to .0003 per inch run-out which optimizes surface contact and maximizes thermal conductivity performance.
- 100% leak tested and inspected direct from factory.
- Total thread length greater than 6.5mm/0.256inch will cause damage to the product. Enzotech warranty will not cover this or any type of damage due to human factor.
- CFS-ID1/2-OD3/4 connector is not used with Stealth
- All Enzotech water blocks are only compatible with Enzotech brand fittings. Enzotech warranty will not cover this or any type of damage due to incorrect installation.
Dimension: |
54(L) x 54(W) x 22(H)mm |
Base: |
54(L) x 54(W) x 4.5(H) mm |
Total Weight: |
250g |
Included: |
One (1)Stealth CPU Water Block One (1)Backplate for Socket 775 One (1)Backplate for LGA 1366 One (1)1366-EZ Retention Module Four (4)Nylon Spacers Four (4)Clip Bolts Two (2)1/2” HI-Flow Hose Barbs with gasket Two (2)Tube Clamps One (1)Arctic Silver® Céramique™ Thermal Grease Installation Guide |